<avr/pgmspace.h>: Program Space Utilities

定義
#define	PROGMEM   __ATTR_PROGMEM__
#define	PSTR(s)   ((const PROGMEM char *)(s))
#define	pgm_read_byte_near(address_short)   __LPM((uint16_t)(address_short))
#define	pgm_read_word_near(address_short)   __LPM_word((uint16_t)(address_short))
#define	pgm_read_dword_near(address_short)   __LPM_dword((uint16_t)(address_short))
#define	pgm_read_float_near(address_short)   __LPM_float((uint16_t)(address_short))
#define	pgm_read_byte_far(address_long)   __ELPM((uint32_t)(address_long))
#define	pgm_read_word_far(address_long)   __ELPM_word((uint32_t)(address_long))
#define	pgm_read_dword_far(address_long)   __ELPM_dword((uint32_t)(address_long))
#define	pgm_read_float_far(address_long)   __ELPM_float((uint32_t)(address_long))
#define	pgm_read_byte(address_short)   pgm_read_byte_near(address_short)
#define	pgm_read_word(address_short)   pgm_read_word_near(address_short)
#define	pgm_read_dword(address_short)   pgm_read_dword_near(address_short)
#define	pgm_read_float(address_short)   pgm_read_float_near(address_short)
#define	PGM_P   const prog_char *
#define	PGM_VOID_P   const prog_void *
Typedef
typedef void PROGMEM	prog_void
typedef char PROGMEM	prog_char
typedef unsigned char PROGMEM	prog_uchar
typedef int8_t PROGMEM	prog_int8_t
typedef uint8_t PROGMEM	prog_uint8_t
typedef int16_t PROGMEM	prog_int16_t
typedef uint16_t PROGMEM	prog_uint16_t
typedef int32_t PROGMEM	prog_int32_t
typedef uint32_t PROGMEM	prog_uint32_t
typedef int64_t PROGMEM	prog_int64_t
typedef uint64_t PROGMEM	prog_uint64_t
関数
char *	strtok_P (char *s, PGM_P delim)
PGM_VOID_P	memchr_P (PGM_VOID_P, int __val, size_t __len)
int	memcmp_P (const void *, PGM_VOID_P, size_t) __ATTR_PURE__
int	memcmp_PF (const void *, uint_farptr_t, size_t) __ATTR_PURE__
void *	memcpy_P (void *, PGM_VOID_P, size_t)
void *	memcpy_PF (void *dest, uint_farptr_t src, size_t len)
PGM_VOID_P	memrchr_P (PGM_VOID_P, int __val, size_t __len)
int	strcasecmp_P (const char *, PGM_P) __ATTR_PURE__
int	strcasecmp_PF (const char *s1, uint_farptr_t s2) __ATTR_PURE__
char *	strcat_P (char *, PGM_P)
char *	strcat_PF (char *dest, uint_farptr_t src)
PGM_P	strchr_P (PGM_P, int __val)
PGM_P	strchrnul_P (PGM_P, int __val)
int	strcmp_P (const char *, PGM_P) __ATTR_PURE__
int	strcmp_PF (const char *s1, uint_farptr_t s2) __ATTR_PURE__
char *	strcpy_P (char *, PGM_P)
char *	strcpy_PF (char *dest, uint_farptr_t src)
size_t	strcspn_P (const char *__s, PGM_P __reject) __ATTR_PURE__
size_t	strlcat_P (char *, PGM_P, size_t)
size_t	strlcat_PF (char *dst, uint_farptr_t src, size_t siz)
size_t	strlcpy_P (char *, PGM_P, size_t)
size_t	strlcpy_PF (char *dst, uint_farptr_t src, size_t siz)
size_t	strlen_P (PGM_P)
size_t	strlen_PF (uint_farptr_t src)
int	strncasecmp_P (const char *, PGM_P, size_t) __ATTR_PURE__
int	strncasecmp_PF (const char *s1, uint_farptr_t s2, size_t n) __ATTR_PURE__
char *	strncat_P (char *, PGM_P, size_t)
char *	strncat_PF (char *dest, uint_farptr_t src, size_t len)
int	strncmp_P (const char *, PGM_P, size_t) __ATTR_PURE__
int	strncmp_PF (const char *s1, uint_farptr_t s2, size_t n) __ATTR_PURE__
char *	strncpy_P (char *, PGM_P, size_t)
char *	strncpy_PF (char *dest, uint_farptr_t src, size_t len)
size_t	strnlen_P (PGM_P, size_t)
size_t	strnlen_PF (uint_farptr_t src, size_t len)
char *	strpbrk_P (const char *__s, PGM_P __accept) __ATTR_PURE__
PGM_P	strrchr_P (PGM_P, int __val)
char *	strsep_P (char **__sp, PGM_P __delim)
size_t	strspn_P (const char *__s, PGM_P __accept) __ATTR_PURE__
char *	strstr_P (const char *, PGM_P) __ATTR_PURE__
char *	strstr_PF (const char *s1, uint_farptr_t s2)
char *	strtok_rP (char *__s, PGM_P __delim, char **__last)
void *	memccpy_P (void *, PGM_VOID_P, int __val, size_t)
void *	memmem_P (const void *, size_t, PGM_VOID_P, size_t) __ATTR_PURE__
char *	strcasestr_P (const char *, PGM_P) __ATTR_PURE__

---

詳しい説明

    #include <avr/io.h>
    #include <avr/pgmspace.h>

The functions in this module provide interfaces for a program to access data stored in program space (flash memory) of the device. In order to use these functions, the target device must support either the LPM or ELPM instructions.

注釈：

These functions are an attempt to provide some compatibility with header files that come with IAR C, to make porting applications between different compilers easier. This is not 100% compatibility though (GCC does not have full support for multiple address spaces yet).

If you are working with strings which are completely based in ram, use the standard string functions described in <string.h>: Strings.

If possible, put your constant tables in the lower 64 KB and use pgm_read_byte_near() or pgm_read_word_near() instead of pgm_read_byte_far() or pgm_read_word_far() since it is more efficient that way, and you can still use the upper 64K for executable code. All functions that are suffixed with a _P require their arguments to be in the lower 64 KB of the flash ROM, as they do not use ELPM instructions. This is normally not a big concern as the linker setup arranges any program space constants declared using the macros from this header file so they are placed right after the interrupt vectors, and in front of any executable code. However, it can become a problem if there are too many of these constants, or for bootloaders on devices with more than 64 KB of ROM. All these functions will not work in that situation.

For Xmega devices, make sure the NVM controller command register (NVM.CMD or NVM_CMD) is set to 0x00 (NOP) before using any of these functions.

---

定義ドキュメント

#define PGM_P   const prog_char *

Used to declare a variable that is a pointer to a string in program space.

#define pgm_read_byte

(

address_short )

pgm_read_byte_near(address_short)

Read a byte from the program space with a 16-bit (near) address.

注釈：

The address is a byte address. The address is in the program space.

#define pgm_read_byte_far

(

address_long )

__ELPM((uint32_t)(address_long))

Read a byte from the program space with a 32-bit (far) address.

注釈：

The address is a byte address. The address is in the program space.

#define pgm_read_byte_near

(

address_short )

__LPM((uint16_t)(address_short))

Read a byte from the program space with a 16-bit (near) address.

注釈：

The address is a byte address. The address is in the program space.

#define pgm_read_dword

(

address_short )

pgm_read_dword_near(address_short)

Read a double word from the program space with a 16-bit (near) address.

注釈：

The address is a byte address. The address is in the program space.

#define pgm_read_dword_far

(

address_long )

__ELPM_dword((uint32_t)(address_long))

Read a double word from the program space with a 32-bit (far) address.

注釈：

The address is a byte address. The address is in the program space.

#define pgm_read_dword_near

(

address_short )

__LPM_dword((uint16_t)(address_short))

Read a double word from the program space with a 16-bit (near) address.

注釈：

The address is a byte address. The address is in the program space.

#define pgm_read_float

(

address_short )

pgm_read_float_near(address_short)

Read a float from the program space with a 16-bit (near) address.

注釈：

The address is a byte address. The address is in the program space.

#define pgm_read_float_far

(

address_long )

__ELPM_float((uint32_t)(address_long))

Read a float from the program space with a 32-bit (far) address.

注釈：

The address is a byte address. The address is in the program space.

#define pgm_read_float_near

(

address_short )

__LPM_float((uint16_t)(address_short))

Read a float from the program space with a 16-bit (near) address.

注釈：

The address is a byte address. The address is in the program space.

#define pgm_read_word

(

address_short )

pgm_read_word_near(address_short)

Read a word from the program space with a 16-bit (near) address.

注釈：

The address is a byte address. The address is in the program space.

#define pgm_read_word_far

(

address_long )

__ELPM_word((uint32_t)(address_long))

Read a word from the program space with a 32-bit (far) address.

注釈：

The address is a byte address. The address is in the program space.

#define pgm_read_word_near

(

address_short )

__LPM_word((uint16_t)(address_short))

Read a word from the program space with a 16-bit (near) address.

注釈：

The address is a byte address. The address is in the program space.

#define PGM_VOID_P   const prog_void *

Used to declare a generic pointer to an object in program space.

#define PROGMEM   __ATTR_PROGMEM__

Attribute to use in order to declare an object being located in flash ROM.

#define PSTR

(

s )

((const PROGMEM char *)(s))

Used to declare a static pointer to a string in program space.

---

Typedefドキュメント

prog_char

Type of a "char" object located in flash ROM.

prog_int16_t

Type of an "int16_t" object located in flash ROM.

prog_int32_t

Type of an "int32_t" object located in flash ROM.

prog_int64_t

Type of an "int64_t" object located in flash ROM.

注釈：

This type is not available when the compiler option -mint8 is in effect.

prog_int8_t

Type of an "int8_t" object located in flash ROM.

prog_uchar

Type of an "unsigned char" object located in flash ROM.

prog_uint16_t

Type of an "uint16_t" object located in flash ROM.

prog_uint32_t

Type of an "uint32_t" object located in flash ROM.

prog_uint64_t

Type of an "uint64_t" object located in flash ROM.

注釈：

This type is not available when the compiler option -mint8 is in effect.

prog_uint8_t

Type of an "uint8_t" object located in flash ROM.

prog_void

Type of a "void" object located in flash ROM. Does not make much sense by itself, but can be used to declare a "void *" object in flash ROM.

---

関数ドキュメント

void * memccpy_P	(	void *	dest,
		PGM_VOID_P	src,
		int	val,
		size_t	len
	)

This function is similar to memccpy() except that src is pointer to a string in program space.

PGM_VOID_P memchr_P	(	PGM_VOID_P	s,
		int	val,
		size_t	len
	)

Scan flash memory for a character.

The memchr_P() function scans the first len bytes of the flash memory area pointed to by s for the character val. The first byte to match val (interpreted as an unsigned character) stops the operation.

返値：

The memchr_P() function returns a pointer to the matching byte or NULL if the character does not occur in the given memory area.

int memcmp_P	(	const void *	s1,
		PGM_VOID_P	s2,
		size_t	len
	)

Compare memory areas.

The memcmp_P() function compares the first len bytes of the memory areas s1 and flash s2. The comparision is performed using unsigned char operations.

返値：

The memcmp_P() function returns an integer less than, equal to, or greater than zero if the first len bytes of s1 is found, respectively, to be less than, to match, or be greater than the first len bytes of s2.

int memcmp_PF	(	const void *	s1,
		uint_farptr_t	s2,
		size_t	len
	)

Compare memory areas.

The memcmp_PF() function compares the first len bytes of the memory areas s1 and flash s2. The comparision is performed using unsigned char operations. It is an equivalent of memcmp_P() function, except that it is capable working on all FLASH including the exteded area above 64kB.

返値：

The memcmp_PF() function returns an integer less than, equal to, or greater than zero if the first len bytes of s1 is found, respectively, to be less than, to match, or be greater than the first len bytes of s2.

void * memcpy_P	(	void *	dest,
		PGM_VOID_P	src,
		size_t	n
	)

The memcpy_P() function is similar to memcpy(), except the src string resides in program space.

返値：

The memcpy_P() function returns a pointer to dest.

void * memcpy_PF	(	void *	dest,
		uint_farptr_t	src,
		size_t	n
	)

Copy a memory block from flash to SRAM.

The memcpy_PF() function is similar to memcpy(), except the data is copied from the program space and is addressed using a far pointer

Parameters:

dst	A pointer to the destination buffer
src	A far pointer to the origin of data in flash memory
n	The number of bytes to be copied

返値：

The memcpy_PF() function returns a pointer to dst. The contents of RAMPZ SFR are undefined when the function returns

void * memmem_P	(	const void *	s1,
		size_t	len1,
		PGM_VOID_P	s2,
		size_t	len2
	)

The memmem_P() function is similar to memmem() except that s2 is pointer to a string in program space.

PGM_VOID_P memrchr_P	(	PGM_VOID_P	src,
		int	val,
		size_t	len
	)

The memrchr_P() function is like the memchr_P() function, except that it searches backwards from the end of the len bytes pointed to by src instead of forwards from the front. (Glibc, GNU extension.)

返値：

The memrchr_P() function returns a pointer to the matching byte or NULL if the character does not occur in the given memory area.

int strcasecmp_P	(	const char *	s1,
		PGM_P	s2
	)

Compare two strings ignoring case.

The strcasecmp_P() function compares the two strings s1 and s2, ignoring the case of the characters.

Parameters:

s1	A pointer to a string in the devices SRAM.
s2	A pointer to a string in the devices Flash.

返値：

The strcasecmp_P() function returns an integer less than, equal to, or greater than zero if s1 is found, respectively, to be less than, to match, or be greater than s2. A consequence of the ordering used by strcasecmp_P() is that if s1 is an initial substring of s2, then s1 is considered to be "less than" s2.

int strcasecmp_PF	(	const char *	s1,
		uint_farptr_t	s2
	)

Compare two strings ignoring case.

The strcasecmp_PF() function compares the two strings s1 and s2, ignoring the case of the characters

Parameters:

s1	A pointer to the first string in SRAM
s2	A far pointer to the second string in Flash

返値：

The strcasecmp_PF() function returns an integer less than, equal to, or greater than zero if s1 is found, respectively, to be less than, to match, or be greater than s2. The contents of RAMPZ SFR are undefined when the function returns

char * strcasestr_P	(	const char *	s1,
		PGM_P	s2
	)

This funtion is similar to strcasestr() except that s2 is pointer to a string in program space.

char * strcat_P	(	char *	dest,
		PGM_P	src
	)

The strcat_P() function is similar to strcat() except that the src string must be located in program space (flash).

返値：

The strcat() function returns a pointer to the resulting string dest.

char * strcat_PF	(	char *	dst,
		uint_farptr_t	src
	)

Concatenates two strings.

The strcat_PF() function is similar to strcat() except that the src string must be located in program space (flash) and is addressed using a far pointer

Parameters:

dst	A pointer to the destination string in SRAM
src	A far pointer to the string to be appended in Flash

返値：

The strcat_PF() function returns a pointer to the resulting string dst. The contents of RAMPZ SFR are undefined when the function returns

PGM_P strchr_P	(	PGM_P	s,
		int	val
	)

Locate character in program space string.

The strchr_P() function locates the first occurrence of val (converted to a char) in the string pointed to by s in program space. The terminating null character is considered to be part of the string.

The strchr_P() function is similar to strchr() except that s is pointer to a string in program space.

返値：

The strchr_P() function returns a pointer to the matched character or NULL if the character is not found.

PGM_P strchrnul_P	(	PGM_P	s,
		int	c
	)

The strchrnul_P() function is like strchr_P() except that if c is not found in s, then it returns a pointer to the null byte at the end of s, rather than NULL. (Glibc, GNU extension.)

返値：

The strchrnul_P() function returns a pointer to the matched character, or a pointer to the null byte at the end of s (i.e., s+strlen(s)) if the character is not found.

int strcmp_P	(	const char *	s1,
		PGM_P	s2
	)

The strcmp_P() function is similar to strcmp() except that s2 is pointer to a string in program space.

返値：

The strcmp_P() function returns an integer less than, equal to, or greater than zero if s1 is found, respectively, to be less than, to match, or be greater than s2. A consequence of the ordering used by strcmp_P() is that if s1 is an initial substring of s2, then s1 is considered to be "less than" s2.

int strcmp_PF	(	const char *	s1,
		uint_farptr_t	s2
	)

Compares two strings.

The strcmp_PF() function is similar to strcmp() except that s2 is a far pointer to a string in program space

Parameters:

s1	A pointer to the first string in SRAM
s2	A far pointer to the second string in Flash

返値：

The strcmp_PF() function returns an integer less than, equal to, or greater than zero if s1 is found, respectively, to be less than, to match, or be greater than s2. The contents of RAMPZ SFR are undefined when the function returns

char * strcpy_P	(	char *	dest,
		PGM_P	src
	)

The strcpy_P() function is similar to strcpy() except that src is a pointer to a string in program space.

返値：

The strcpy_P() function returns a pointer to the destination string dest.

char * strcpy_PF	(	char *	dst,
		uint_farptr_t	src
	)

Duplicate a string.

The strcpy_PF() function is similar to strcpy() except that src is a far pointer to a string in program space

Parameters:

dst	A pointer to the destination string in SRAM
src	A far pointer to the source string in Flash

返値：

The strcpy_PF() function returns a pointer to the destination string dst. The contents of RAMPZ SFR are undefined when the funcion returns

size_t strcspn_P	(	const char *	s,
		PGM_P	reject
	)

The strcspn_P() function calculates the length of the initial segment of s which consists entirely of characters not in reject. This function is similar to strcspn() except that reject is a pointer to a string in program space.

返値：

The strcspn_P() function returns the number of characters in the initial segment of s which are not in the string reject. The terminating zero is not considered as a part of string.

size_t strlcat_P	(	char *	dst,
		PGM_P	src,
		size_t	siz
	)

Concatenate two strings.

The strlcat_P() function is similar to strlcat(), except that the src string must be located in program space (flash).

Appends src to string dst of size siz (unlike strncat(), siz is the full size of dst, not space left). At most siz-1 characters will be copied. Always NULL terminates (unless siz <= strlen(dst)).

返値：

The strlcat_P() function returns strlen(src) + MIN(siz, strlen(initial dst)). If retval >= siz, truncation occurred.

size_t strlcat_PF	(	char *	dst,
		uint_farptr_t	src,
		size_t	n
	)

Concatenate two strings.

The strlcat_PF() function is similar to strlcat(), except that the src string must be located in program space (flash) and is addressed using a far pointer

Appends src to string dst of size n (unlike strncat(), n is the full size of dst, not space left). At most n-1 characters will be copied. Always NULL terminates (unless n <= strlen(dst))

Parameters:

dst	A pointer to the destination string in SRAM
src	A far pointer to the source string in Flash
n	The total number of bytes allocated to the destination string

返値：

The strlcat_PF() function returns strlen(src) + MIN(n, strlen(initial dst)). If retval >= n, truncation occurred. The contents of RAMPZ SFR are undefined when the funcion returns

size_t strlcpy_P	(	char *	dst,
		PGM_P	src,
		size_t	siz
	)

Copy a string from progmem to RAM.

Copy src to string dst of size siz. At most siz-1 characters will be copied. Always NULL terminates (unless siz == 0). The strlcpy_P() function is similar to strlcpy() except that the src is pointer to a string in memory space.

返値：

The strlcpy_P() function returns strlen(src). If retval >= siz, truncation occurred.

size_t strlcpy_PF	(	char *	dst,
		uint_farptr_t	src,
		size_t	siz
	)

Copy a string from progmem to RAM.

Copy src to string dst of size siz. At most siz-1 characters will be copied. Always NULL terminates (unless siz == 0).

返値：

The strlcpy_PF() function returns strlen(src). If retval >= siz, truncation occurred. The contents of RAMPZ SFR are undefined when the function returns

size_t strlen_P

(

PGM_P

src )

The strlen_P() function is similar to strlen(), except that src is a pointer to a string in program space.

返値：

The strlen() function returns the number of characters in src.

size_t strlen_PF

(

uint_farptr_t

s )

Obtain the length of a string.

The strlen_PF() function is similar to strlen(), except that s is a far pointer to a string in program space

Parameters:

s	A far pointer to the string in flash

返値：

The strlen_PF() function returns the number of characters in s. The contents of RAMPZ SFR are undefined when the function returns

int strncasecmp_P	(	const char *	s1,
		PGM_P	s2,
		size_t	n
	)

Compare two strings ignoring case.

The strncasecmp_P() function is similar to strcasecmp_P(), except it only compares the first n characters of s1.

Parameters:

s1	A pointer to a string in the devices SRAM.
s2	A pointer to a string in the devices Flash.
n	The maximum number of bytes to compare.

返値：

The strncasecmp_P() function returns an integer less than, equal to, or greater than zero if s1 (or the first n bytes thereof) is found, respectively, to be less than, to match, or be greater than s2. A consequence of the ordering used by strncasecmp_P() is that if s1 is an initial substring of s2, then s1 is considered to be "less than" s2.

int strncasecmp_PF	(	const char *	s1,
		uint_farptr_t	s2,
		size_t	n
	)

Compare two strings ignoring case.

The strncasecmp_PF() function is similar to strcasecmp_PF(), except it only compares the first n characters of s1 and the string in flash is addressed using a far pointer

Parameters:

s1	A pointer to a string in SRAM
s2	A far pointer to a string in Flash
n	The maximum number of bytes to compare

返値：

The strncasecmp_PF() function returns an integer less than, equal to, or greater than zero if s1 (or the first n bytes thereof) is found, respectively, to be less than, to match, or be greater than s2. The contents of RAMPZ SFR are undefined when the function returns

char * strncat_P	(	char *	dest,
		PGM_P	src,
		size_t	len
	)

Concatenate two strings.

The strncat_P() function is similar to strncat(), except that the src string must be located in program space (flash).

返値：

The strncat_P() function returns a pointer to the resulting string dest.

char * strncat_PF	(	char *	dst,
		uint_farptr_t	src,
		size_t	n
	)

Concatenate two strings.

The strncat_PF() function is similar to strncat(), except that the src string must be located in program space (flash) and is addressed using a far pointer

Parameters:

dst	A pointer to the destination string in SRAM
src	A far pointer to the source string in Flash
n	The maximum number of bytes to append

返値：

The strncat_PF() function returns a pointer to the resulting string dst. The contents of RAMPZ SFR are undefined when the function returns

int strncmp_P	(	const char *	s1,
		PGM_P	s2,
		size_t	n
	)

The strncmp_P() function is similar to strcmp_P() except it only compares the first (at most) n characters of s1 and s2.

返値：

The strncmp_P() function returns an integer less than, equal to, or greater than zero if s1 (or the first n bytes thereof) is found, respectively, to be less than, to match, or be greater than s2.

int strncmp_PF	(	const char *	s1,
		uint_farptr_t	s2,
		size_t	n
	)

Compare two strings with limited length.

The strncmp_PF() function is similar to strcmp_PF() except it only compares the first (at most) n characters of s1 and s2

Parameters:

s1	A pointer to the first string in SRAM
s2	A far pointer to the second string in Flash
n	The maximum number of bytes to compare

返値：

The strncmp_PF() function returns an integer less than, equal to, or greater than zero if s1 (or the first n bytes thereof) is found, respectively, to be less than, to match, or be greater than s2. The contents of RAMPZ SFR are undefined when the function returns

char * strncpy_P	(	char *	dest,
		PGM_P	src,
		size_t	n
	)

The strncpy_P() function is similar to strcpy_P() except that not more than n bytes of src are copied. Thus, if there is no null byte among the first n bytes of src, the result will not be null-terminated.

In the case where the length of src is less than that of n, the remainder of dest will be padded with nulls.

返値：

The strncpy_P() function returns a pointer to the destination string dest.

char * strncpy_PF	(	char *	dst,
		uint_farptr_t	src,
		size_t	n
	)

Duplicate a string until a limited length.

The strncpy_PF() function is similar to strcpy_PF() except that not more than n bytes of src are copied. Thus, if there is no null byte among the first n bytes of src, the result will not be null-terminated

In the case where the length of src is less than that of n, the remainder of dst will be padded with nulls

Parameters:

dst	A pointer to the destination string in SRAM
src	A far pointer to the source string in Flash
n	The maximum number of bytes to copy

返値：

The strncpy_PF() function returns a pointer to the destination string dst. The contents of RAMPZ SFR are undefined when the function returns

size_t strnlen_P	(	PGM_P	src,
		size_t	len
	)

Determine the length of a fixed-size string.

The strnlen_P() function is similar to strnlen(), except that src is a pointer to a string in program space.

返値：

The strnlen_P function returns strlen_P(src), if that is less than len, or len if there is no '\0' character among the first len characters pointed to by src.

size_t strnlen_PF	(	uint_farptr_t	s,
		size_t	len
	)

Determine the length of a fixed-size string.

The strnlen_PF() function is similar to strnlen(), except that s is a far pointer to a string in program space

Parameters:

s	A far pointer to the string in Flash
len	The maximum number of length to return

返値：

The strnlen_PF function returns strlen_P(s), if that is less than len, or len if there is no '\0' character among the first len characters pointed to by s. The contents of RAMPZ SFR are undefined when the function returns

char * strpbrk_P	(	const char *	s,
		PGM_P	accept
	)

The strpbrk_P() function locates the first occurrence in the string s of any of the characters in the flash string accept. This function is similar to strpbrk() except that accept is a pointer to a string in program space.

返値：

The strpbrk_P() function returns a pointer to the character in s that matches one of the characters in accept, or NULL if no such character is found. The terminating zero is not considered as a part of string: if one or both args are empty, the result will NULL.

PGM_P strrchr_P	(	PGM_P	s,
		int	val
	)

Locate character in string.

The strrchr_P() function returns a pointer to the last occurrence of the character val in the flash string s.

返値：

The strrchr_P() function returns a pointer to the matched character or NULL if the character is not found.

char * strsep_P	(	char **	sp,
		PGM_P	delim
	)

Parse a string into tokens.

The strsep_P() function locates, in the string referenced by *sp, the first occurrence of any character in the string delim (or the terminating '\0' character) and replaces it with a '\0'. The location of the next character after the delimiter character (or NULL, if the end of the string was reached) is stored in *sp. An ``empty'' field, i.e. one caused by two adjacent delimiter characters, can be detected by comparing the location referenced by the pointer returned in *sp to '\0'. This function is similar to strsep() except that delim is a pointer to a string in program space.

返値：

The strsep_P() function returns a pointer to the original value of *sp. If *sp is initially NULL, strsep_P() returns NULL.

size_t strspn_P	(	const char *	s,
		PGM_P	accept
	)

The strspn_P() function calculates the length of the initial segment of s which consists entirely of characters in accept. This function is similar to strspn() except that accept is a pointer to a string in program space.

返値：

The strspn_P() function returns the number of characters in the initial segment of s which consist only of characters from accept. The terminating zero is not considered as a part of string.

char * strstr_P	(	const char *	s1,
		PGM_P	s2
	)

Locate a substring.

The strstr_P() function finds the first occurrence of the substring s2 in the string s1. The terminating '\0' characters are not compared. The strstr_P() function is similar to strstr() except that s2 is pointer to a string in program space.

返値：

The strstr_P() function returns a pointer to the beginning of the substring, or NULL if the substring is not found. If s2 points to a string of zero length, the function returns s1.

char * strstr_PF	(	const char *	s1,
		uint_farptr_t	s2
	)

Locate a substring.

The strstr_PF() function finds the first occurrence of the substring s2 in the string s1. The terminating '\0' characters are not compared. The strstr_PF() function is similar to strstr() except that s2 is a far pointer to a string in program space.

返値：

The strstr_PF() function returns a pointer to the beginning of the substring, or NULL if the substring is not found. If s2 points to a string of zero length, the function returns s1. The contents of RAMPZ SFR are undefined when the function returns

char* strtok_P	(	char *	s,
		PGM_P	delim
	)

Parses the string into tokens.

strtok_P() parses the string s into tokens. The first call to strtok_P() should have s as its first argument. Subsequent calls should have the first argument set to NULL. If a token ends with a delimiter, this delimiting character is overwritten with a '\0' and a pointer to the next character is saved for the next call to strtok_P(). The delimiter string delim may be different for each call.

The strtok_P() function is similar to strtok() except that delim is pointer to a string in program space.

返値：

The strtok_P() function returns a pointer to the next token or NULL when no more tokens are found.

注釈：

strtok_P() is NOT reentrant. For a reentrant version of this function see strtok_rP().

char * strtok_rP	(	char *	string,
		PGM_P	delim,
		char **	last
	)

Parses string into tokens.

The strtok_rP() function parses string into tokens. The first call to strtok_rP() should have string as its first argument. Subsequent calls should have the first argument set to NULL. If a token ends with a delimiter, this delimiting character is overwritten with a '\0' and a pointer to the next character is saved for the next call to strtok_rP(). The delimiter string delim may be different for each call. last is a user allocated char* pointer. It must be the same while parsing the same string. strtok_rP() is a reentrant version of strtok_P().

The strtok_rP() function is similar to strtok_r() except that delim is pointer to a string in program space.

返値：

The strtok_rP() function returns a pointer to the next token or NULL when no more tokens are found.